Call us at 1-888-826-6342
LEVEL INDICATOR AND INTERFACE, with NEMA 4X Enclosure
LEVEL INDICATOR AND INTERFACE
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Indicates Tank Level or Volume and Relay Status
- Enables Relay Set Point Changes in the Field
- Powered Directly by the Attached Sensors
- Repeats Sensor Data with No Programming
LVCN-40 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Display Color
Number of Display Digits
Display Type
Form Factor
Display Digit Height
The LVCN-40 indicator displays tank level or volume in engineering units with 1 to 4 relay status indicators, and is compatible with LVCN210, LVCN318 or LVCN414 series level sensor that’s been configured with the provided software (V50 firmware or higher). Powered by the sensor, the field mount indicator may be located up to 4.5 m (15') from the sensor. The LVCN-40 requires no programming. The indicator repeats the measured value, displays relay status and set-point configuration of the attached sensor. If relay set-point changes are desired, they can be easily made through the field indicator.
Specifications
Display
Type: LCD, 6-digit with 4 relay indicators
Units: Engineering
Output: -99999 to 999999
Character Height: 9.5 mm (0.374")
Decimal Point: Fixed
Dot Indication: Relay status
User Interface: Three button
Sensor Input (1): LVCN210, LVCN318 or LVCN414 series
Supply Voltage: Provided by sensor
Operating Temperature: -20 to 60°C (-4 to 140°F)
Cable
Type: 4-conductor, #22 AWG
Length: 1.8 m (6')
Jack Material: Polyurethane
Enclosure
Rating: Nema 4 (IP65) faceplate
Material: Polycarbonate
Type: Panel mount
Button Material: Silicon rubber
Classification: General purpose
Specifications
Display
Type: LCD, 6-digit with 4 relay indicators
Units: Engineering
Output: -99999 to 999999
Character Height: 9.5 mm (0.374")
Decimal Point: Fixed
Dot Indication: Relay status
User Interface: Three button
Sensor Input (1): LVCN210, LVCN318 or LVCN414 series
Supply Voltage: Provided by sensor
Operating Temperature: -20 to 60°C (-4 to 140°F)
Cable
Type: 4-conductor, #22 AWG
Length: 1.8 m (6')
Jack Material: Polyurethane
Enclosure
Rating: Nema 4 (IP65) faceplate
Material: Polycarbonate
Type: Panel mount
Button Material: Silicon rubber
Classification: General purpose
What are the dimensions of the level indicator and the panel cutout
Thanks for your questions. Dimensions and mounting procedure information is in the manual. Review the link below.
https://assets.omega.com/manuals/M5335.pdf
Date published: 2019-09-20
