Call us at 1-888-826-6342
CLS2 Capacitive Level Switch
Capacitive Level Switch, Weatherproof, Standard Rod
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $764.10 |
| 5-9 | $725.90 |
| 10-24 | $710.61 |
| 25-49 | $680.05 |
| 50-99 | $664.77 |
| 100+ | $649.49 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- CLS2 can activate the calibration without having to open the enclosure
- Works from 12 to 240 VAC/DC without any jumpers or settings
- Not affected by materials that coat or build up on the probe preventing false alarms
- Switches can be set for Normally Open or Normally Closed condition on loss of power
- Excellent, stabel, level measurement while being insensitive to material buildup
CLS2-W11RK2-010 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Probe Type
Process Connection
Probe/Cable/Rod Length
Enclosure
Switch Type
Power Supply
Insulation Type
- Electric Connections 1/2" NPT conduit opening, screw termination and removable terminal block.
- Electrical Rating 8 A @ 120/240 VAC res., 30 VDC. 1/2 hp @ 120 VAC and 1/4 hp @ 240 VAC ind.
- Enclosure Rating Weatherproof, NEMA 4X.
- Mounting Orientation Vertical or horizontal.
- Power Consumption 2.8 Watts max.
- Power Requirements 12 to 240 VAC/DC.
- Pressure Limit 365 psi (25 bar)
- Response Time 0.2 s.
- Sensitivity 8 selectable settings, 1, 2, 4, 6, 8, 10, 14, 20 pF (at 30 pF nominal free capacitance).
- Service Liquids, powder and bulk materials compatible with wetted materials.
- Set Point Adjustment Trips when product touches probe. Cut or extend probe to length of desired trip point. Can be cut as short a 1" and can be extended by welding on to probe. (Minimum length will be effected by material being sensed.)
- Spark/Static Protection 10 MEG Ohm dissipation resistance with spark gap. Surge current to 100A max.
- Switch Type DPDT (two form C).
- Temperature Limits Ambient: -40 to 185°F (-40 to 85°C), -4 to 185°F (-20 to 85°C) with under 24 VAC/DC power supply; Process: -40 to 250°F (-40 to 121°C).
- Time Delay Adjustable, 0 to 60 s.
- Wetted Materials 316 SS and polyvinylidene fluoride (PVDF).
The Series CLS2 Capacitive Level Switch is a capacitive technology level switch which can be used for liquids, powders and bulk materials. It is offered with PVDF and 316 SS wetted material, weatherproof enclosure, DPDT output and a variety of process connections.
