Your feedback matters, take a quick surveyWebsite feedback
SS Immersion Heater 1.25" NPT Process Water
Screw Plug Immersion Heaters for Process Water Applications
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $1,209.35 |
| 5-9 | $1,148.88 |
| 10-24 | $1,124.70 |
| 25-49 | $1,076.32 |
| 50-99 | $1,052.13 |
| 100+ | $1,027.95 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- 1 ¼' NPT Stainless Steel Passivated Screw Plug
- Stainless Steel Passivated Elements
- High Watt Density (43 to 86 W/in2)
- 1 to 2 kW
MTS-120E2/120 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Power
Power Density
Supply Voltage
Enclosure Type
Form Factor
Connection Type
Heating Element Length
Supply Voltage Type
Heated Medium
Sheath Material
Please Note: This immersion heater should be used with an approved temperature control device to assure safe operation. See Controller Section for our selection of process controllers
SPECIFICATIONS
Wattage: 1 to 2 kW
Power: 120 and 240 V, 1 phase
Watt Density: 43 to 86 W/in2
Screw Plug: 1¼ NPT stainless steel passivated screw plug
Enclosures: E1 general purpose, NEMA 1 (IP00) rated, or type E2 moistureresistant/ explosion-resistant enclosure2.
* Designate voltage, i.e., "120" for 120 Vac or "240" for 240 Vac.
1 Heaters with general purpose enclosures are UL Listed and CSA certified.
2 Heaters with moisture-resistant/explosion-resistant enclosures are CSA NRTL/C certified and are not intended for use in hazardous areas.
SPECIFICATIONS
Wattage: 1 to 2 kW
Power: 120 and 240 V, 1 phase
Watt Density: 43 to 86 W/in2
Screw Plug: 1¼ NPT stainless steel passivated screw plug
Enclosures: E1 general purpose, NEMA 1 (IP00) rated, or type E2 moistureresistant/ explosion-resistant enclosure2.
| kW | Volts | W/in2 | No. Htg. Elem. | E1 General Purpose Enclosure1 | E2 Moisture Resis/Explosion Resis.2 | |||
| Dim. B cm (in) | Model No. | Wt.kg (lb) | Model No. | Wt.kg (lb) | ||||
| 1 | 120 | 43 | 2 | 15.5 (6 1/8) | MTS-110-3/* | 0.9 (2) | MTS-110-3E2/* | 2.3 (5) |
| 1 | 240 | 43 | 2 | 15.5 (6 1/8) | MTS-110-3/* | 0.9 (2) | MTS-110-3E2/* | 2.3 (5) |
| 1.2 | 120 | 53 | 2 | 15.5 (6 1/8) | MTS-112/* | 0.9 (2) | MTS-112E2/* | 2.3 (5) |
| 1.2 | 240 | 53 | 2 | 15.5 (6 1/8) | MTS-112/* | 0.9 (2) | MTS-112E2/* | 2.3 (5) |
| 1.5 | 120 | 65 | 2 | 15.5 (6 1/8) | MTS-115/* | 0.9 (2) | MTS-115E2/* | 2.3 (5) |
| 1.5 | 240 | 65 | 2 | 15.5 (6 1/8) | MTS-115/* | 0.9 (2) | MTS-115E2/* | 2.3 (5) |
| 2 | 120 | 86 | 2 | 15.5 (6 1/8) | MTS-120/* | 0.9 (2) | MTS-120E2/* | 2.3 (5) |
| 2 | 240 | 86 | 2 | 15.5 (6 1/8) | MTS-120/* | 0.9 (2) | MTS-120E2/* | 2.3 (5) |
1 Heaters with general purpose enclosures are UL Listed and CSA certified.
2 Heaters with moisture-resistant/explosion-resistant enclosures are CSA NRTL/C certified and are not intended for use in hazardous areas.
