Call us at 1-888-826-6342
MSCS-A Series
Mini, Adjustable Current Switch, Split Core, NO, 0.70 to 150A Range, Trip Point
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $55.00 |
| 5-9 | $52.25 |
| 10-24 | $51.15 |
| 25-49 | $48.95 |
| 50-99 | $47.85 |
| 100+ | $46.75 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
A/MSCS-A Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Product Type
Core Type
Amperage Range
Analog Output
Measurement
Contact Type
Contact Rating
Aperture Size Diamete
- Agency Approvals UL/CUL US Listed (UL 916) Energy Management Equipment (File # E334792)
- Amperage Range See Ordering Grid
- Aperture Size 0.53” (13.46 mm)
- Contact Type Normally-Open “N/O”
- Core Style Split-Core Versions
- Enclosure Material | Flammability Rating PC/ABS (Polycarbonate/ABS Blend) | UL94-V0
- Hysteresis 10% Trip Point
- Isolation Voltage 2200 VAC
- Maximum AC Voltage 600 VAC
- Minimum Mounting Distance 1” (2.6 cm) between current switch (Relays
- Monitored Current Type AC Current
- Operating Frequency Range 50/60 Hz
- Operating Humidity Range 0 to 95%
- Operating Temperature Range -22 to 140ºF (-30 to 60ºC)
- Product Dimensions A/MSCS-A (Split-Core): 2.650” (67.19 mm) x 0.940” (23.94 mm) x 2.380” (60.49 mm)
- Product Weight A/MSCS-A: 0.20 lbs. (0.091 kg)
- Response Time A/MCS-A: < 90 mS
- Sensor Power Induced from the Monitored Conductor (Insulated Conductors only)
- Status LED Indication Red LED (Current above trip point) | Blue LED (Current below trip point)
- Storage Temperature | RH Range 41 to 95°F (5 to 35°C) | 40% to 85% RH
- Terminal Block Torque Rating 4.43 to 5.31 in-lbs. (0.5 to 0.6 Nm)
- Trip Point Style | Trip Point Adjustable Trip Point | See Ordering Grid
- Wire Size 16 to 22 AWG (1.31 mm2 to 0.33 mm2) Copper Wires only
- Wiring Connections 2 Position Screw Terminal Block (Not Polarity Sensitive)
- “Status” Contact Rating 1A Continuous @ 36 VAC/VDC
- “Status” Contact “On” Resistance | “Off” Resistance < 0.5 Ohms (tripped) | > 1 Meg Ohms (Open)
The Miniature Adjustable Current switches are designed for use in any AC current monitoring application in which you are looking for an adjustable current switch to monitor normal operating conditions, equipment failure or preventative maintenance scheduling for a particular piece of equipment. The adjustable current switches should be installed on the line side of the power to the motor, pump, compressor or other equipment. The miniature adjustable current switches are available in both solid and split-core versions in a smaller enclosure style than that of the A/ACS2 and A/ASCS2 Series adjustable current switches. The split-core version of the current switches work great in retro‑t applications and for use in service vehicles since one part will work in most applications and can be installed without disconnecting any wires. The adjustable current status switches can also be used to determine the run time of your equipment where you want to know when your piece of equipment runs and for how long it runs when logging the contact closures on your building management system or PLC.
