Call us at 1-888-826-6342
Butt-Welded Unsheathed Fine Gage Microtemp Thermocouples
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | $60.05 |
| 10-24 | $57.05 |
| 25-99 | $54.05 |
| 100-499 | $51.04 |
| 500-999 | $48.04 |
| 1000+ | $45.04 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Butt- Weld Design
- Faster Response Time Than Standard Beaded Wire Thermocouples.
- Utilized in Tight Spaces
CHCO-032-BW-30 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Cable Length
Nominal Resistance
Accuracy
Number of Wires
Pack Size
Wire Gauge
Thermocouple Type
Process Temperature Range
Application
Resistance or Output Type
Electrical Connection Type
Maximum Temperature Measurement
Minimum Temperature Measurement
Additional Features
Category
Junction Type
Termination Connection Type
Cable Insulation
Color Code Standard
Additional Feature
- Measurement Units °C
- Measurement Type Air/Gas Temperature
Base Metal Thermocouples Prices given for twelve (12) inch lengths. Other sizes and lengths are available on special order. A twelveinch length corresponds to each leg for 24" total length. To order longer lead lengths for base metal calibrations, add 4.00 per foot per package.
Platinum/Rhodium Thermocouples Prices given for six (6) inch lengths. Other sizes and lengths are available on special order. To order longer lead lengths for Pt/Rh calibrations, see the table below.
View the Thermocouple Accuracy and Color Code charts
Platinum/Rhodium Thermocouples Prices given for six (6) inch lengths. Other sizes and lengths are available on special order. To order longer lead lengths for Pt/Rh calibrations, see the table below.
View the Thermocouple Accuracy and Color Code charts
Rated 5 out of
5
by
Anonymous from
Excellent quality butt-welded thermocouples
These thermocouples are very well made and very well packaged. So far I've used about 20 of the 40AWG K-type variant and the consistency is very good. My only issue with using these has been determining the exact location of the weld, since the wire is so fine and the bulge where the junction is welded is so minimal (this is probably less of a problem with larger wire). They do coat the wire with a red varnish where the junction is, but the coated length is 1-2 cm long, so it's easy to find roughly where the junction is, but I needed to locate the junction within 1mm. It was still possible, just difficult. I don't think this is a fault in the product, its just the nature of working with such fine thermocouples.
Date published: 2024-08-09
