Call us at 1-888-826-6342
Bolt-On Thermistor Surface Sensors with Aluminum Flag Housing
Flag-Mount Surface Mount Thermistor Sensor
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | $76.30 |
| 10-24 | $72.49 |
| 25-99 | $68.67 |
| 100-499 | $64.86 |
| 500-999 | $61.04 |
| 1000+ | $57.23 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Please refer to replacement part number ON-931-44005-40
- Aluminum Housing Provides Rapid Heat Transfer Between the Sensor and Mounting Surface for Accurate Measurements. Housing Includes a Clearance Hole for a #4 Mounting Screw or Can be Cemented or Epoxied to Flat Surfaces.
- Available with resistances of 2252 Ohms, 3,000 Ohms, 5000 Ohms, 10,000 Ohms or 30,000 Ohms at 25°C
- Standard Accuracy is ±0.2°C from 0 to 70°C, Optional Accuracy of ±0.1°C from 0 to 70°C is Available.
- Maximum Temperature Range 100°C
- Available with 12" (305mm) long PFA Insulated Wires or 40" (1 meter) Long PFA Insulated and Jacketed Cables.
ON-930-44005 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Category
Process Temperature Range
Sensor Application
Nominal Resistance
Accuracy
Cable Insulation
Termination Connection Type
Cable Length
This surface sensor is designed for a variety of temperature measurement applications. It represents a low-cost, fast response sensor and lends itself to easy mounting on flat surfaces.
Is the potting material low outgassing?
The potting material being fully cured has negligible outgassing.
Date published: 2020-12-16
Is this thermistor ROHS 3 compliant?
Thank you for your inquiry MAMD. Yes, this thermistor is ROHS 3 complaint.
Date published: 2021-07-08
What is the center diameter of the hole on the aluminum mount?
The hole diameter accepts a #4 screw whose diameter is 7/64th or 0.11 inch diameter.
Date published: 2020-10-29
