Probes with Lead Wires

Omega's RTD probe with lead wire offers choice of 2-3- or 4-wire configuration. This is available in three temperature ranges covering -200°C to 600°C (-328 to 1112°F)

Thermocouple probes have a metal transition between the sensor & cable. Cable has a Stainless Steel Overbraid to protect it from damage and a miniature connector attached.

Configurable thermocouple probes with fiberglass insulated cable that is rated to 482°C. Available with Stainless Steel, Inconel, and Omegaclad XL sheaths.

Thin-film element RTD probes with 1/8" NPT brass compression fittings and armored cable. Commonly used in extruder & molding equipment. Straight and bend options available.

Type R, S or B platinum thermocouple probes with ceramic protection tubes and transition joint to flexible extension cable. For use in high temperature applications.

GENERAL PURPOSE PROBE

RTD Sensors great for installing into pipes or limited space applications. Single and Dual element designs, 1/8" or 1/4" NPT mounting threads available with 72" of lead wire.

This RTD probe has stainless steel-overbriaded wires which offers durability for applications where the wire is continually moving or exposed to sharp objects.

Small diameter sensor allows for use in tight spaces, hermetically sealed and available in three resistances and standard lengths.

Thermocouple probe assemblies with exotic sheath materials for extreme temperature applications up to 2315°C & lead wires. Available in type R, S, B, C, and D calibrations.

Omega's "BX" armored probe is designed for resistance to abrasion and snagging and excessive movement. Comes with choice of PFA- or fiberglass-coated wires.

Thermistor probes with 1/8" NPT mounting threads for liquid immersion and pressurized applications. Five resistances and two accuracies available.

Probes with Stainless Steel Tips for use under the high pressures and temps found in plastic extruders. Available in single & dual element options with 1/2"-20 NF threads.

Probe contains an integrated circuit (IC) transducer AD592CN that provides an output in microamps that is proportional to temperature. Requires 4 to 30 VDC input voltage.

Thermocouple probe connects directly with your computer via the provided USB connector. Free software allows for temperature data to be displayed directly on your screen.

Class A, pt100 RTD probe ideal for gas and air applications. Has a flanged housing and small diameter probe to allow easy mounting into ducts and flow systems.

Configurable thermocouple probes with PFA insulated cable that is rated to 260°C. Available in Stainless Steel, Inconel, and Omegaclad XL sheaths.

Rugged RTD Probe with Insulated Wire and Metal Strain Relief

Configurable thermocouple probes with lead wire. Molded transition joint from probe to cable is miniature (260°C max). Probe diameters range from .010" to .125".

Metal sheathed, mineral insulated thermocouple probes with completed sensing end and bare lead wires. Typically used as a component of a larger assembly.