PST joins DwyerOmega. Read more>
Thin Film Pressure Sensor with 100 mV Output, Excellent Long Term Stability
SPECIFICATIONS
Excitation: 10 Vdc (5 to 10 Vdc limits)
Output: 0 to 100 mV @ 10 Vdc
Sensitivity: 10 mV/V
Input Impedance: 1500 Ω
Output Impedance: 100 Ω
Insulation Resistance: 100 MΩ @50 Vdc
Accuracy: ±0.4% BFSL
Hysteresis: ±0.2%
Repeatability: ±0.05%
Stability: ±1%/year
Zero Balance: ±1%
Durability: 100 million cycles
Operating Temp: -48 to 91°C (-55 to 195°F)
Compensated Temp: -29 to 82°C (-20 to 180°F)
Thermal Zero Effect: ±0.07% FS/°C
Thermal Span Effect: ±0.07% FS/°C
Proof Pressure:
15 to 2000 psi = 200%
3000 to 5000 psi = 150%
7500 to 20,000 psi = 120%
Burst Pressure:
15 to 2000 psi = 800%
3000 to 20,000 psi = 500%
Gages: Thin film polysilicon
Diaphragm: 17-4 PH stainless steel
Case: 300 Series stainless steel
Pressure Connection:
15 to 10,000 psi: ¼ NPT
15,000 and 20,000 psi: 9⁄16-18 UNF Aminco fitting
Electrical Connection: 0.9 m (36') braided-shield PVC cable or connector
Weight: 71 g (2.5 oz.) without cable
Response time: 5 ms
Construction: Sealed units (except PX602 ≤ 500 psi is vented to room)
Excitation: 10 Vdc (5 to 10 Vdc limits)
Output: 0 to 100 mV @ 10 Vdc
Sensitivity: 10 mV/V
Input Impedance: 1500 Ω
Output Impedance: 100 Ω
Insulation Resistance: 100 MΩ @50 Vdc
Accuracy: ±0.4% BFSL
Hysteresis: ±0.2%
Repeatability: ±0.05%
Stability: ±1%/year
Zero Balance: ±1%
Durability: 100 million cycles
Operating Temp: -48 to 91°C (-55 to 195°F)
Compensated Temp: -29 to 82°C (-20 to 180°F)
Thermal Zero Effect: ±0.07% FS/°C
Thermal Span Effect: ±0.07% FS/°C
Proof Pressure:
15 to 2000 psi = 200%
3000 to 5000 psi = 150%
7500 to 20,000 psi = 120%
Burst Pressure:
15 to 2000 psi = 800%
3000 to 20,000 psi = 500%
Gages: Thin film polysilicon
Diaphragm: 17-4 PH stainless steel
Case: 300 Series stainless steel
Pressure Connection:
15 to 10,000 psi: ¼ NPT
15,000 and 20,000 psi: 9⁄16-18 UNF Aminco fitting
Electrical Connection: 0.9 m (36') braided-shield PVC cable or connector
Weight: 71 g (2.5 oz.) without cable
Response time: 5 ms
Construction: Sealed units (except PX602 ≤ 500 psi is vented to room)
