PST joins DwyerOmega. Read more>
Wet/Wet Differential Board Mounted Pressure Sensors
0 to 250 psi, Gauge Pressure
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | $100.78 |
| 10-24 | $95.74 |
| 25-49 | $93.73 |
| 50-99 | $89.69 |
| 100+ | $87.68 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Wet/Wet Differential Pressure
Water and Many Other Liquids May be Applied to Both Sides - Gage and Differential Models Available
- Miniature PC Board Mountable Design
- SIP 4-Pin Package
PX26-250GV Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Pressure Range
Pressure Type
Electrical Output
Accuracy Class
Accuracy Value(compensated range)
Output Signal
Pressure Port Size
Pressure Port Type
Connection/ Termination
Operating Temperature Range
- Excitation 10 Vdc
- Accuracy Value 0.25
- Input Resistance 7.5 kΩ
- Output Resistance 2.5 kΩ
- Repeatability 0.2% FS
- Wetted Materials Silicon Diaphragm
- Zero Balance ±1.5 mV
OMEGA’s PX26 Series pressure sensors feature state-of-the-art silicon technology which permits both sides of the diaphragm to handle liquids. A unique conductive seal between the silicon diaphragm and the plastic housing allows for wet/wet applications and lower production costs than typical gold wire silicon sensors. This new construction has a larger diaphragm than traditional silicon sensors, resulting in increased long-term stability.
SPECIFICATIONS
Excitation:10 Vdc, 16 Vdc max @ 2 mA
Output (@ 10 Vdc):1 psi = 16.7 mV, 5 psi = 50 mv; >5 psi = 100 mV; 250 psi = 150 mV
Linearity:±0.25% FS BFSL Typical
(±1% maximum) P2>P1
Hysteresis and Repeatability:0.2% FS
Zero Balance:±1.5 mV
Span Tolerance:±3.0 mV
1 Year Stability:0.5% FS
Operating Temperature:-40 to 85°C (-40 to 185°F)
Compensated Temperature:0 to 50°C (32 to 122°F)
Thermal Effects:
Zero: 1 mV Span: 1% Rdg
Proof Pressure:20 psi for ≤5 psi;
45 psi for 15 psi ; 60 psi for 30 psi
200 psi for 100 psi range
Input Resistance:7.5kΩ
Output Resistance:2.5kΩ
Response Time:1 ms
Gage Type:Silicon sensor
Wetted Parts:Polyethimide, silicon, fluorosilicone
Mating Connector:CX136-4, ($2.50), not included
Weight:2 g (0.07 oz)
Rated 3 out of
5
by
Jack2019 from
Sometimes OK but sometime not
We bought this a month ago for our water pressure loop test, initally it was good and be sensitive to pressure drop changes and read correctly.
However, after switching and squeeze air out of in and outlet lines, found the connection was easy to break and get wet so readings were really out of range.
Date published: 2019-01-23
Rated 5 out of
5
by
Cray from
Pressure measurements inside small ID thin tubing
We use these pressure gauges in combination with the PLATINUM™ Series Digital Panel Meters (DP8PT-006) to determine the pressure inside thin flexible tubing as water is flowing inside. WE use three of these pressure gauges along the tubing and can determine the pressure changes with the experimental conditions. They work well and are responsive.
Date published: 2024-02-14
Rated 5 out of
5
by
WJB ENTERPRISE from
Filter Supplies
This order and every one I have placed with Omega has been handled very efficiently.
Date published: 2023-03-15
What voltage regulator should be used for this transducer? Is there one commercially available?
Dear Shishir,
Excitation: 10 Vdc, 16 Vdc max @ 2 mA
Any regulated 10 volts DC power supply will work. You can use our PST-4130 power supply.
Date published: 2020-06-09
I'm using a PX26-005DV to measure the pressure drop . At high flow rates, the sensor works but at low flow rates where pressure drop is 0.01 psi, the sensor gives negative value. Is it because of range of the sensor? would PX26-001DV solve the problem?
Hoomichi, you are trying to measure a pressure drop that is too low to be captured by this sensor. This is a low cost unit that can measure at quarter percent accuracy. Please see the PX409 differential series models for better measurement. For more questions please email pressure@omega.com
Date published: 2020-12-30
Do you have recommended NI DAQ to log pressure measured by PX26?
We would not have any information on what NI DAQ would work with the PX26 transducer.
Date published: 2023-07-06
We are using an omega sensor that looks to be from the PX26 family for differential pressure. The sensor is etched with the code 6BF60 and 201033N. We want to have a spare. Can anyone equate the sensor we have with a current model we can purchase?
Code 6BF6D is the equivalent to our PX26-005DV
Date published: 2021-05-19
This sensor says that it is for wet applications.... Is it possible to use this with air, or would that not work well/correctly?
Any of our sensors that we state are for wet application will also work fine use with gases. Air would be just fine.
Date published: 2021-04-08
The PX26-001DV shows an output of 10mv/V, according to your selector menu on this web page, but all data sheets indicate 1 psi models as having 0-16.7 mV output when connected to a 10V DC power supply. Which is it?
The error is in the part number builder in the product page. The 1 PSI range units in both the Differential and Gage models have a 1.67 mV/V sensitivity. Having the error corrected
Date published: 2023-02-14
How high of a vacuum will this sensor tolerate? I don't need a vacuum readout, but it would likely experience a vacuum equivalent of ~50-75 psi.
This unit is not designed for vacuum application, if this application requires a vacuum measurement you may want to choose a different product.
Date published: 2021-08-10
Is any step file (3D) availabe for the PX26-Series ?
Thank you for your inquiry.
We do not have a 3d model for this unit.
The dimensional information is listed on the specification page .
Hope this was helpful.
Date published: 2020-07-28
