Skip to search Skip to main content Skip to navigation

Positive Displacement Flow Meter for Corrosive Liquids

0.0

(0)

Positive Displacement Flow Meter for Corrosive Liquids

Click and hold to zoom

Data Sheet (PDF)

$1,621.00

Item# FPD3105

QTY

Added to Your Shopping Cart

In stock

Lead Time (If not in stock): 6 weeks

+ Add to Project List

PPS Body
Temperatures up to 80ºC (176ºF)
NPT or BSP Threads

View Specs

FPD3105 Model Options

View all models

Edit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.

*Highlighted options are not compatible. Please select a different combination.

Flow Range

Output Signal

Max Operating Pressure

Max Process Temperature

Wetted Materials

Process Connection Size

Display

Supply Power

Category

Accuracy

Process Connection Type

Features

Specs

Edit Model Options

Accuracy Value ±0.5% of reading
Cable Type PVC
Electrical Connection 2 x 12 mm (0.08 x 0.47")
Fitting Type NPT or BSP Threads
Maximum Liquid Temperature (Liquid Temp Range?) 80 {C} (176 {F})
Measurement Type Flow
Media Type Corrosive Liquids
Minimum Liquid Temperature -40 {C} (-40 {F})
Number of Display Digits 7
Reed Sensor Voltage 30 Vdc (500 mA)
Repeatability ±0.03%
Strainer Size See ordering chart on next page
Supply Voltage 4.5 to 24 Vdc (7.5 mA)
Viscosity Range 1 to 1000 cPs standard

The FPD3100 Series positive displacement flowmeters are affordable and accurate. One primary feature is the ability to maintain consistent accuracy despite changing viscosity conditions. The meter’s solid construction and excellent dynamic response are well suited to the measurement of many corrosives as well as other non-abrasive fluids. Since there is no need for straight run piping upstream or downstream of the flowmeter, the FPD3100 flowmeters are simple to use and to install. The meter has good resolution and high accuracy at low flow rates.

Specifications
Accuracy: ±0.5% of reading
Repeatability: ±0.03%
Fitting Type:
    NPT: Female
    BSP: “-BSP” option
Hall-Effect Sensor Power: 4.5 to 24 Vdc (7.5 mA)
Reed Sensor Power: 30 Vdc (500 mA)
Output Options:
    Pulse Output: Standard NPN
    4 to 20 mA Transmitter: “-D-A” option; no output on battery powered “-D” model
Display: 7-digit/12 mm (0.47") upper, 7-digit/7 mm (0.28") lower all “-D” options
    Rate: User defined
    Total: Resettable
    Accumulated-Total: Non-resettable FPD3105
Minimum Viscosity: 1cPs
Maximum Viscosity: 1000 cPs standard
Maximum Pressure: See chart on next page
Strainer Size: See ordering chart on next page
Mounting: Shafts must be in a horizontal plane
Electrical Connections: 2 x 12 mm (0.08 x 0.47"), fittings included “-D-A” option
Cable Length: 1 m (3') stripped ends, non-display models
Mounting: Pipe
Power: 4 to 20 mA, “-D-A” models 18 to 30 Vdc display, “-D” models 3 Vdc lithium battery (included)
Liquid Temperature: -40 to 80°C (-40 to 176°F), -20 to 60°C (-4 to 140°F) for display models
Materials
    Body and Rotors: PPS
    Seals: FFKM, FEP (FPD3105)
    Fasteners: Stainless steel
    Cable Insulation: PVC
    Shaft: Hastelloy C
Enclosure: NEMA 6 (IP67)

All Models