Your feedback matters, take a quick surveyWebsite feedback
1/4 DIN 10-Channel Automatic Temperature Scanner
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $630.50 |
| 5-9 | $598.98 |
| 10-24 | $567.45 |
| 25-49 | $535.93 |
| 50-99 | $504.40 |
| 100+ | $472.88 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Large Backlight Dual LCD
- J, K, T, E Thermocouple Inputs
- Latching High/Low Limit Alarms
- 5 Amp Relay Output
DP1001AM Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Display Size
Thermocouple Type
Specifications Input Type
Number of Inputs
Number of Display Digits
Communications Protocol
Display Type
Form Factor
Number of Relays
Supply Voltage
Resolution
Input Range
The DP1001AM microprocessor-based 10-channel scanner accepts the same thermocouple input type for each input. Each channel can be manually or automatically scanned and active zones are displayed. Instrument is programmable for J, K, T or E thermocouple input types, degrees °C or °F, and scan rate between 2 to 60 seconds. Each channel has individual, independent and programmable alarm setpoints with alarm indicator. Memory and setpoints are retained when power is off.
The RS232 communications (2 wire configuration, Transmit/Ground) can monitor up to ten channels and software is included with every unit. A single output latching form C relay is provided to activate for an alarm condition on any zone. The instrument shows alarm condition for each channel on front display. The alarms are latching and are reset manually from the front panel.
SPECIFICATIONS
Thermocouple Temperature Ranges:
Type J: -50 to 1000°C (-58 to 1832°F)
Type K: -50 to 1370°C (-58 to 2498°F)
Type T: -120 to 400°C (-184 to 752°F)
Type E: -50 to 759°C (-58 to 1382°F)
Input: Type J, K, T or E thermocouple
Output: 5 A SPDT relay @ 250 Vac resistive
RS232: Transmit Only, 2 wire configuration, Tansmit & Ground connections, One way communications only
Alarm Type: Hi/Lo, latching, manual reset
Power Requirements: 9 Vdc, 200 mA (115 Vac adaptor included)
Power Consumption: 1.8 watts
Accuracy: ±0.15% of reading, ±1°C (±1.8°F)
Display: LCD, backlight, PV, SV and status indicators, 4-digit, PV 1.4 cm (0.56")
Resolution: 0.1 (< 1000), 1 (> 1000)
Memory Backup: Nonvolatile memory Ambient Operating Temperature: 0 to 50°C (32 to 122°F)
Storage Temperature: 0 to 50°C (32 to 122°F)
Weight: 374 g (12 oz)
Dimensions: 89 H x 83 W x 95 mm D (3.50 x 3.27 x 3.75")
Panel Cutout: 92 x 92 mm (3.622 x 3.622")
The RS232 communications (2 wire configuration, Transmit/Ground) can monitor up to ten channels and software is included with every unit. A single output latching form C relay is provided to activate for an alarm condition on any zone. The instrument shows alarm condition for each channel on front display. The alarms are latching and are reset manually from the front panel.
SPECIFICATIONS
Thermocouple Temperature Ranges:
Type J: -50 to 1000°C (-58 to 1832°F)
Type K: -50 to 1370°C (-58 to 2498°F)
Type T: -120 to 400°C (-184 to 752°F)
Type E: -50 to 759°C (-58 to 1382°F)
Input: Type J, K, T or E thermocouple
Output: 5 A SPDT relay @ 250 Vac resistive
RS232: Transmit Only, 2 wire configuration, Tansmit & Ground connections, One way communications only
Alarm Type: Hi/Lo, latching, manual reset
Power Requirements: 9 Vdc, 200 mA (115 Vac adaptor included)
Power Consumption: 1.8 watts
Accuracy: ±0.15% of reading, ±1°C (±1.8°F)
Display: LCD, backlight, PV, SV and status indicators, 4-digit, PV 1.4 cm (0.56")
Resolution: 0.1 (< 1000), 1 (> 1000)
Memory Backup: Nonvolatile memory Ambient Operating Temperature: 0 to 50°C (32 to 122°F)
Storage Temperature: 0 to 50°C (32 to 122°F)
Weight: 374 g (12 oz)
Dimensions: 89 H x 83 W x 95 mm D (3.50 x 3.27 x 3.75")
Panel Cutout: 92 x 92 mm (3.622 x 3.622")
What is the recommended calibration/maintenance frequency for Item Item# DP1001AM?
Thank you for connecting with OMEGA.
Recommended maintenance should be performed annually on a continuous basis. This will ensure maximum shelf life of the unit
Date published: 2022-01-26
Is there a way to change the alarm relay from latched to momentary?
Hi MH3050
Thank you for the request. DP1001AM has latching alarms only.
Best regards,
OMEGA
Date published: 2024-03-24
Can a delay be put on an output? I need it to turn the output on for maintained temperature not spikes.
Hi Jimmie
Thank you for the inquiry. This unit does not have delay function.
Best regards
OMEGA
Date published: 2022-02-03
Can I calibrate the DP1001AM?
Thank you for your question.
You cannot calibrate this unit in the field. Our 10 channel temperature scanner has an automatic calibration system internally, this is done by the microprocessor master control board. If the unit is not reading accurately then you need to contact our customer care team.
Date published: 2019-06-26
Alarm Type: Hi/Lo, what does this mean? High and Low window, band? Manual doesn't explain the setup? Thank you
Thank you for your inquiry! This simply means that each channel has the option for a high or low alarm which will trigger when that high or low value is exceeded by the process value.
Date published: 2021-04-01
I noticed a CJC (assuming that stands for Cold Junction Compensation) terminal on the back of the unit in the pinout diagram in the manual, but your manual doesn't mention it at all. could you expand on its setup/use(s).
Thank you for the inquiry. The CJC temperature sensor is located in the area of the copper wire to thermocouple terminations. The sensor output is used to determine the compensation needed to offset the electric potential generated at the copper wire to thermocouple termination.
Best regards
OMEGA
Date published: 2021-09-16
Is there a CAD step file for this module? If not how about a 2D drawing with the overall dimensions?
Thank you for your inquiry. Unfortunately, we do not have a CAD, Step File or 2-dimensional drawing available for this product. Dimensions: 89 H x 83 W x 95 mm D
(3.50 x 3.27 x 3.75") ; Panel Cutout: 92 x 92 mm (3.622 x 3.622")
Date published: 2022-08-04
Do you have mounting instruction? I can't find it the manual. What are the options that could be mount? Any accessory need?
Thank you for your inquiry. This instrument is a panel mount design for a standard 1/4 DIN panel opening (Panel Cutout: 92 x 92 mm (3.622 x 3.622 in), mounting hardware is included.
Date published: 2021-12-16
Accessories (Field installable)
