Call us at 1-888-826-6342
Copper or SS Drum Immersion Heater Thermostat Over the Side
Drum Immersion Heaters for High Viscosity Solutions and Adjustable Stainless Steel Mounting Bracket
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $836.32 |
| 5-9 | $794.50 |
| 10-24 | $777.78 |
| 25-49 | $744.32 |
| 50-99 | $727.60 |
| 100+ | $710.87 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Fits Through the Standard 51 mm (2') Bung Opening in 55 Gallon Drums
- Ideal for Improving the Flow of Lard, Tar, Oils and Other High Viscosity Solutions
- Double Pole 16 to 121ºC (60 to 250°F) Thermostat with Over- Temperature Cutout and Pilot Lamp to Indicate Heater On/Off Status
- Only 203 mm (8') of Vertical Riser is Heated, Allowing Liquid Level to Fluctuate without Damaging the Heater
TAT30001 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Power
Power Density
Supply Voltage
Sheath Material
Form Factor
Heating Element Length
Riser Length
Maximum Operating Temperature
Minimum Operating Temperature
Features
Installation, Operation and Maintenance Instructions
1. Ensure the Vertical Heated Portion, Which Extends 203 mm (8") Up Riser from Bottom of Element, is Always Fully Immersed
2. Use in Metal Drums, Containers or Heat Resistant Tanks Only
3. All Wiring Should Be in Accordance with NEC/Nfpa and Local Codes
4. Use Techniques Safe for the Heater and Surrounding Environment
5. Use Mounting Brackets to Position Heater Away from Tank Wall and Above Sludge Buildup at Bottom of Tank
6. Periodically Remove the Heater to Clean Residues and Inspect for Damage
1. Ensure the Vertical Heated Portion, Which Extends 203 mm (8") Up Riser from Bottom of Element, is Always Fully Immersed
2. Use in Metal Drums, Containers or Heat Resistant Tanks Only
3. All Wiring Should Be in Accordance with NEC/Nfpa and Local Codes
4. Use Techniques Safe for the Heater and Surrounding Environment
5. Use Mounting Brackets to Position Heater Away from Tank Wall and Above Sludge Buildup at Bottom of Tank
6. Periodically Remove the Heater to Clean Residues and Inspect for Damage
| Model No. | Sheath | Watt Density | Watts | Volts | A | B | |||
|---|---|---|---|---|---|---|---|---|---|
| watt/in2 | watt/cm2 | mm | inch | mm | inch | ||||
| TAT30003 | Copper | 8 | 1.2 | 1000 | 120 | 914 | 36 | 483 | 19 |
| TAT30004 | 32 | 5.0 | 4000 | 240 | |||||
| TAT30002 | Stainless Steel | 8 | 1.2 | 1000 | 120 | 914 | 36 | 483 | 19 |
| TAT30001 | 32 | 5.0 | 4000 | 240 | |||||
| TAT30005 | Steel | 8 | 1.2 | 1000 | 120 | 914 | 36 | 483 | 19 |
| TAT30006 | 32 | 5.0 | 4000 | 240 | |||||
| Note: This style heater can be manufactured with “A” and “B” dimensions suitable for other applications. Consult Omega with your requirements. Ordering Example: TAT30003, 1000 watts, 120 Vac immersion heater. | |||||||||
