PST joins DwyerOmega. Read more>
This product is currently unavailable. For a potential alternate, please see IF-006-1-NA and SP-014-1
The Omega Link SS-015 Smart Sensor provides an easy way to integrate process and digital pulse inputs to your Omega Link Ecosystem. SS-015 Smart Sensors provide a long-range wireless sub GHz interface for devices that produce both process and digital signals and transmits them to the Omega Link Cloud. External process and digital signal devices connect to the SS-015 through an M12 5-pin connector (M12.5-S-M-FM screw terminal accessory sold separately) and easily pair to a Omega Link Gateway through a one-button pairing system. The device can be powered by internal batteries, USB power, or an optional external power source (sold separately). The SS-015 may be configured to monitor up to 3 industry standard process signals including 4-20 mA, 0-1.0 VDC, and 0-2.0 VDC. The SS-015 may also be configured to monitor the on/off state of the input signals, the pulse rate/width and duty cycle of the primary input, or the pulse delay between the two signals. The pulse totalizing function supports both standard counting and up/down counting. Each of the 3 inputs can be individually configured to allow mixed configurations to monitor both Process and Pulse Signals simultaneously. Additionally, a low power sensor signal excitation power output is available.
The SS-015 is easily paired to the Omega Link Gateway with the press of a button and will automatically show up on your Omega Link Cloud account. The Omega Link Gateway can connect up to 256 Smart Sensors3 per unit. Local data logging keeps your data secure in the event of a power or network outage. Reports, History, and E-mail alerts from the Omega Link Cloud keep you informed on the status of all your vital processes.
Configure your Omega Link Smart Sensor using our free SYNC configuration software. Configurable features include selective data extraction, measurement and device traceability, local alarms, and adaptive transmission rates to reduce data congestion and extend battery life.
Omega Link wireless products are designed with state of the art security features to protect your data with robust AES256 encryption and advanced PKA-EC521bit (NIST) elliptic-curve cryptography to protect your data. Password protection ensures that access to device data is restricted and only accessible by authorized users. Device Authentication ensures that Omega Link Smart probes connect to validated Omega devices.
The SS-015 is fully compatible with the Omega Link ecosystem of devices, SYNC configuration software, and the Omega Link Cloud.
*Clear line of sight. Actual range may vary depending on environment.
*External power adapter optional. External power specification based on Omega specific power adaptor
Type | Range | Operating Conditions | Accuracy |
---|---|---|---|
Frequency (f) | 0.1 Hz to 100 Hz | TPW MIN = 200 uS | ±0.5% |
Frequency (f) | 100 Hz to 1000 Hz | TPW MIN = 200 uS | ±1 Hz averaged over 1 sec. |
Counter | 0 to +8388608 | 0 to +8388608 | ±1 count max |
Up/Down Counter | -8388608 to +8388608 | 1 kHz Max Rate | ±1 count max |
Pulse Width (TPW) | 200 uS min | ± 50 uS ±1% | |
Pulse Delay (TPP) | 200 uS min | ±50 uS ±1% | |
Duty Cycle | 1% to 99% | 0.01 Hz to 1000 Hz, TPW MIN = 200 uS | ±1.5% Max |
Type | Range | Resolution | Min | Max | Accuracy | Input Independence |
---|---|---|---|---|---|---|
Current Loop | 0-24 mA | ±0.1 mA | 0 mA | 24 mA | ±0.2 mA | 50 ohm |
Voltage | 0-1.0 VDC | ±10 mV | 0 VDC | 1.2 VDC | ±10 mV | 100k ohm |
Voltage | 0-2.0 VDC | ±10 mV | 0 VDC | 2.5 VDC | ±20 mV | 100k ohm |
Pin | Process /Analog | Digital | Mixed Mode |
---|---|---|---|
Pin 1 | Excitation Power (3.3 VDC, 100 mA) | Excitation Power (3.3 VDC, 100 mA) | Excitation Power (3.3 VDC, 100 mA) |
Pin 2 | Process 0 | DIN 0/Pulse A | DIN 0/Pulse A |
Pin 3 | Ground Reference | Ground Reference | Ground Reference |
Pin 4 | Process 2 | DIN 2/Enable/ Direction/ Pulse B | Process 0 |
Pin 5 | Process 1 | DIN 1/Reset | DIN 1/Reset |
Omega Link Cloud consolidates and brings your data to you when you need it, wherever you are. The intuitive cloud interface allows you to monitor and store your data, set alarms and alerts, and provides insights on device activity.Visit the OMEGA website for more details.
Model Number | Description |
---|---|
SS-015-NA | Wireless Sub-GHz Process and Digital Pulse Input Smart Sensor - 915 MHz |
A Omega Link Wireless Gateway is required to connect your SS-015 to the Omega Link Cloud.
Model Number | Description |
---|---|
GW-001-2-NA | Wireless IIoT Gateway Standard, Ethernet connectivity, connects up to 256 Omega Link Smart Sensors - 915 MHz |
GW-001-3-NA | Wireless IIoT Gateway Pro, Ethernet connectivity, power over Ethernet, connects up to 256 Omega Link Smart Sensors, Modbus RTU RS232/RS485 and Modbus TCP, 2x USB ports - 915 MHz |
GW-002-1-LTE | Wireless LTE IIoT Gateway Pro connects up to 40 Omega Link Smart Sensors, Modbus RTU RS232/ RS485 and Modbus TCP, 1x RJ45 port, 1x USB port -915 MHz |
An optional M12 5-pin screw terminal adapter is recommended for users who will connect wire leads directly to the SS-015.
Model Number | Description |
---|---|
M12.5-S-M-FM | M12 5-pin screw terminal adapter |
UNIV-AC-100/240-5-M8 | Universal AC adapter with M8 connector |