PST joins DwyerOmega. Read more>
Filter Fans for Larger Enclosures
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $225.10 |
| 5-9 | $213.85 |
| 10-24 | $209.34 |
| 25-49 | $200.34 |
| 50-99 | $195.84 |
| 100+ | $191.34 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
FF01821002 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Form Factor
Input Current
Seal Material
Weight
This outdoor filter fan can be used in outdoor enclosures where warm air has to be dissipated on account of increased thermic development. To clean and exchange the filter mat, it is only necessary to open the lockable door of the outdoor hood. A protection type of NEMA 4 (IP55) is achieved due to the special design of the hood and the use of fine filter mats. The plastic casing is impact resistant, highly weather proof and resistant to UV light.
SPECIFICATIONS
Filter Mat: Fine grade 360 g/m2, filtering degree 98% particle Ø >10µm, F5 (EN 779)
Air Flow Free Blowing: 11.8 cfm (20 m3/h)
Current Consumption: 180 mA
Power Consumption: 15 W Average Noise Level at 10 m (3'): (DIN EN ISO 9614-2) 40 dB (A)
Mounting Depth: 62 mm (2.4")
Enclosure Cut-Out: 125 x 125 mm (4.9 x 4.9") ±0.4
Weight: Approx 1.2 kg (2.6 lb)
Protection Type: NEMA 4 (IP55)
Axial Fan: Ball bearing, aluminum frame, plastic impeller UL94V-0; operational life min 50,000 hrs at 25°C (77°F) (RH 65%); ambient temperature -30 to 70°C (-22 to 158°F); connection 3-pole terminal, AWG 14 [2.5 mm2 (0.10")] max Filter Fan and Exhaust Filter Housing: Plastic, UL94V-0; color light gray, temperature resistant -0.5 to 70°C (-31 to 158°F)
Mounting Frame: With double sided industrial adhesive tape for affixing to the outside of enclosure; certain operating conditions may make the additional use of screws necessary
Filter Material: Synthetic fiber with progressive construction, temperature resistant to 100°C (212°F), self-extinguishing class F1; moisture resistant to 100% RH; can be cleaned by washing or vacuuming for reuse EXHAUST FILTER
Filter Mat: Medium grade 360 g/m2, filtering degree 98% for particle Ø<10 m, F5 (EN 779)
Mounting Depth: 16 mm (0.6")
Enclosure Cut-Out: 125 x 125 mm (4.9 x 4.9") ±0.4
Weight: 0.60 kg (1.3 lb)
SPECIFICATIONS
Filter Mat: Fine grade 360 g/m2, filtering degree 98% particle Ø >10µm, F5 (EN 779)
Air Flow Free Blowing: 11.8 cfm (20 m3/h)
Current Consumption: 180 mA
Power Consumption: 15 W Average Noise Level at 10 m (3'): (DIN EN ISO 9614-2) 40 dB (A)
Mounting Depth: 62 mm (2.4")
Enclosure Cut-Out: 125 x 125 mm (4.9 x 4.9") ±0.4
Weight: Approx 1.2 kg (2.6 lb)
Protection Type: NEMA 4 (IP55)
Axial Fan: Ball bearing, aluminum frame, plastic impeller UL94V-0; operational life min 50,000 hrs at 25°C (77°F) (RH 65%); ambient temperature -30 to 70°C (-22 to 158°F); connection 3-pole terminal, AWG 14 [2.5 mm2 (0.10")] max Filter Fan and Exhaust Filter Housing: Plastic, UL94V-0; color light gray, temperature resistant -0.5 to 70°C (-31 to 158°F)
Mounting Frame: With double sided industrial adhesive tape for affixing to the outside of enclosure; certain operating conditions may make the additional use of screws necessary
Filter Material: Synthetic fiber with progressive construction, temperature resistant to 100°C (212°F), self-extinguishing class F1; moisture resistant to 100% RH; can be cleaned by washing or vacuuming for reuse EXHAUST FILTER
Filter Mat: Medium grade 360 g/m2, filtering degree 98% for particle Ø<10 m, F5 (EN 779)
Mounting Depth: 16 mm (0.6")
Enclosure Cut-Out: 125 x 125 mm (4.9 x 4.9") ±0.4
Weight: 0.60 kg (1.3 lb)
