Call us at 1-888-826-6342
Heavy Duty Paddle Flow Switch
Paddle Flow Switch
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Multiple Quick-Change Paddles
- EPDM Seal
- Field Adjustable Set Points
- Direct Replacement for Most Paddle-Type Flow Switches
FSW-160 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Media Type
Flow Range
Accuracy
Max Operating Pressure
Max Process Temperature
Process Connection Type
Process Connection Size
Wetted Materials
Switch Rating and Type
Supply Power
The OMEGA™ FSW-160 is the newest heavy-duty line of flow switches. The switch is used to signal, start, or stop electronically operated equipment when flow or no-flow conditions occur.
Omega’s elastomeric sealing system is superior to the metal bellows that are subject to metal fatigue and corrosion. This seal system has been field-proven for over a decade. The FSW-160 can be used in pipes 1 inch and larger, with set-points as low as 4 GPM (15.2 LPM) to over 500 GPM (1893 LPM) in larger pipe sizes. The FSW160 uses a 15A SPDT micro switch that can control a 1/2 horsepower motor.
Specifications
Hysteresis (? Flow Rate to Activate/ Deactivate Switch)
10% at upper end of flow range
30% at lower end of flow range
Differential Pressure Drops Across Unit Under Normal Operating Conditions:
1 to 3" pipe, less than 1 psi
4 to 48" pipe, negligible
Working Line Pressure: 200 psig maximum [proof tested to 1200 psig at 21°C (70°F)]
Working Temperature: 121°C (250°F) maximum continuous
Wetted Materials:
Body and Lid: Brass
Shaft: 304 stainless steel
Paddle: 316 stainless steel
Seal: EPDM
Electrical Switch Characteristics SPDT 15 A, 1/2 hp at 125 or 250 Vac 0.5 A at 125 Vdc (tungsten lamp) 0.25 A @ 250 Vdc (tungsten lamp)
Omega’s elastomeric sealing system is superior to the metal bellows that are subject to metal fatigue and corrosion. This seal system has been field-proven for over a decade. The FSW-160 can be used in pipes 1 inch and larger, with set-points as low as 4 GPM (15.2 LPM) to over 500 GPM (1893 LPM) in larger pipe sizes. The FSW160 uses a 15A SPDT micro switch that can control a 1/2 horsepower motor.
Specifications
Hysteresis (? Flow Rate to Activate/ Deactivate Switch)
10% at upper end of flow range
30% at lower end of flow range
Differential Pressure Drops Across Unit Under Normal Operating Conditions:
1 to 3" pipe, less than 1 psi
4 to 48" pipe, negligible
Working Line Pressure: 200 psig maximum [proof tested to 1200 psig at 21°C (70°F)]
Working Temperature: 121°C (250°F) maximum continuous
Wetted Materials:
Body and Lid: Brass
Shaft: 304 stainless steel
Paddle: 316 stainless steel
Seal: EPDM
Electrical Switch Characteristics SPDT 15 A, 1/2 hp at 125 or 250 Vac 0.5 A at 125 Vdc (tungsten lamp) 0.25 A @ 250 Vdc (tungsten lamp)
Rated 5 out of
5
by
Kareen from
Perfect!
Exactly as advertised and quick to ship! Our end user gave it 5 stars.
Date published: 2024-02-13
RoHS 2015/863 - View Certificate
CE Approved
UKCA
