Call us at 1-888-826-6342
B&K Vibro Non-Contacting Integrated Displacement Sensor
Integrated oscillator, 1.5 mm measuring range, built-in driver electronic
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | $950.89 |
| 10-24 | $903.35 |
| 25-49 | $884.33 |
| 50-99 | $846.29 |
| 100+ | $827.27 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Compact design simplifies installation
- Integrated design with built-in driver electronic
- No need for a separate oscillator
- up to 15 m integrated cable length
IN-081/4/070/50/0 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Range
Linearity
Process Electrical Output
Rating
Housing Length
Housing Diameter/Width
- Cable Length 15 ft
- Current Consumption 20 mA Maximum
- IP classification (Sensor) IP54
- Nominal system length up to 15m
- Operating Temperature Range 0 to 110 °C (32 to 230 °F)
- Operating Voltage -18 to -30 Vdc
- Output Signal 0 to (Supply Voltage +2 Vdc)
- Storage Temperature Range -20 to 70 °C (-4 to 158 °F)
- Weight 120g
The integrated displacement sensor system IN-081 is based on the non-contacting eddy-current measurement principle. It measures the distance between the tip of the displacement sensor and an electrically conductive surface and provides a subsequent monitoring system with a proportional voltage signal.
Normally non-contacting ECDS (eddy current displacement sensor) systems consist of a sensor probe, a driver electronic and a connection cable to connect both. Based on long-time experience and knowledge B&K Vibro engineers developed an innovative sensor system that integrates all the various components of discrete systems into one single housing.
The IN-081 sensor system obtains important information about the condition of rotating shafts of turbines, generators, compressors or pumps.
Normally non-contacting ECDS (eddy current displacement sensor) systems consist of a sensor probe, a driver electronic and a connection cable to connect both. Based on long-time experience and knowledge B&K Vibro engineers developed an innovative sensor system that integrates all the various components of discrete systems into one single housing.
The IN-081 sensor system obtains important information about the condition of rotating shafts of turbines, generators, compressors or pumps.
