Skip to search Skip to main content Skip to navigation

Accelerometers Laboratory Grade for High Vibration Levels

0.0

(0)

Accelerometers Laboratory Grade for High Vibration Levels

Click and hold to zoom

Data Sheet (PDF)

Item# ACC103

This item is discontinued.
Please contact Technical Sales Team for assistance.

10 mV/g Output to 500 g's
Ideal for Laboratory Shake Testing
High Shock/Acceleration Range up to ±500 g’s
Fast Turn-on Time (1 Sec.)

View Specs

Specs

Edit Model Options

Amplitude Non-linearity ±2% up to 500 g peak
Base Strain Sensitivity 0.001 g per microstrain @ 25°/µσ
Connection Type 10-32 male
Electrical Noise Broadband 0.007 g (rms)
Measurement Type Speed
Output Impedance 100 Ω
Resonance Frequency >40 kHz
Transverse Sensitivity 5% of axial max

The ACC103 laboratory accelerometer is ideal for use in shake tests, vibration labs, and other general purpose vibration applications. The ACC103 weighs only 15 grams, ideal for applications where low accelerometer weight is critical. It has a 10 mv/g output which can measure vibrations up to 500 g's.

SPECIFICATIONS
Frequency Response: 1 Hz to 10 kHz (up to ±10% rated output shift)
Rated Output: 10 mV/g nominal @ 100 Hz
Frequency Range: 2 Hz to 10 kHz (up to ±5% rated output shift)
Amplitude Range: ±500 g peak
Amplitude Linearity: ±2% up to 500 g peak
Temperature Range: -50 to 120°C (-60 to 250°F)
Temperature Sensitivity Effect: 0.06% FS/°F
Discharge Time Constant: 0.5 s min
Transverse Sensitivity: 5% of axial max
Strain Sensitivity: 0.001 g per microstrain @ 25°/µσ
Maximum g Without Clipping: ±1000 g
Mounted Resonance Frequency: >40 kHz
Output Impedance: 100 Ω
Bias Voltage: 10V nominal
Base Strain: 0.03 g/microstrain nominal
Noise Floor (Wideband): 0.007 g (rms)
Weight: 1.5 g (0.05 oz) nominal (without cable)
Material: Stainless steel
Dimensions: 7.11 H x 6.35 mm hex base (0.28 x 0.25')
Connector: 10-32 male, cable not included (order model no. ACC-CB2-10)

All Models