PST joins DwyerOmega. Read more>
Handheld Precision Current Loop Calibrator with 24V Loop Power
PRECISION CURRENT LOOP CALIBRATOR
- Best in Class Accuracy at 0.01% of Reading
- Small Rugged Design Operates on 6 �AAA� Batteries (Included)
- 24 Vdc Loop Power for mA Measure Mode
- Intuitive Interface with Quick-Set Knob
The CL110 is a precision loop calibrator that features a user friendly interface with dedicated buttons and a quick set knob. This combination dramatically reduces the time it takes to measure or source current and power up a loop. The rugged case is contoured to fit a technicians hand and the large backlit graphics LCD is easy-to-read in any lighting.
SPECIFICATIONS
Functions: mA source, simulate, read or read with loop power, voltage read only
Ranges: 0 to 24 mA, 0 to 30 Vdc (read only)
Resolution: 1 uA on mA range and 1 mV on voltage range
Accuracy: ±0.01% rdg +2 LSD all ranges (@23 ±5°C)
Operating Temperature: -10 to 55°C (14 to 131°F)
Temperature Effect: 20 ppm/°C from -10 to 18°C and 28 to 55°C
Humidity Range: 10 to 95% non-condensing
Display: 128 x 64 pixel LCD graphic display with backlight, 9 mm (0.34') high digits
Power: 6 “AAA” batteries (alkaline, lithium or NiMH) included
Battery Life: > 40 hours continuous (measure mode using alkaline)
Loop Compliance Voltage: 24 Vdc @ 20 mA
Over-Voltage Protection: 240 Vac
Overload Current Protection: 28 mA DC
Dimensions: 150 L x 90 W x 30 mm D (6 x 3.6 x 1.3')
Weight: 0.3 kg (9.5 oz)
SPECIFICATIONS
Functions: mA source, simulate, read or read with loop power, voltage read only
Ranges: 0 to 24 mA, 0 to 30 Vdc (read only)
Resolution: 1 uA on mA range and 1 mV on voltage range
Accuracy: ±0.01% rdg +2 LSD all ranges (@23 ±5°C)
Operating Temperature: -10 to 55°C (14 to 131°F)
Temperature Effect: 20 ppm/°C from -10 to 18°C and 28 to 55°C
Humidity Range: 10 to 95% non-condensing
Display: 128 x 64 pixel LCD graphic display with backlight, 9 mm (0.34') high digits
Power: 6 “AAA” batteries (alkaline, lithium or NiMH) included
Battery Life: > 40 hours continuous (measure mode using alkaline)
Loop Compliance Voltage: 24 Vdc @ 20 mA
Over-Voltage Protection: 240 Vac
Overload Current Protection: 28 mA DC
Dimensions: 150 L x 90 W x 30 mm D (6 x 3.6 x 1.3')
Weight: 0.3 kg (9.5 oz)
Hello, Do any of these loop calibrators have CSA or CUL approval ratings ??
CL110 does not have CSA or CUL Approvals.
Date published: 2021-04-07
In mA Source mode, with nothing attached to it, the display will alternate showing output level and "OL". I cannot find this in the manual. What does this mean?
Hi Islandan,
Thank you for the inquiry. This calibrator can provide signal to resitive loads up to 1200Ω without HART resistor, 950 Ω with HART resistor. Reistances greater than these or open line result in error message "OL".
Best regards,
OMEGA
Date published: 2024-10-22