Skip to search Skip to main content Skip to navigation

Current to Pressure Transducers

Current to pressure transducer, 4-20 mA input, 6-30 psi (40-200 kPa) output.

(0)

Click and hold to zoom

Data Sheet (PDF)

$182.60

Item# IP-44

QTY

Added to Your Shopping Cart

In stock

Lead Time (If not in stock): 7 weeks

+ Add to Project List

Built-in volume booster
Low air consumption
Flexible zero plus span adjustments
NEMA 4X enclosure
Field reversible

View Specs

IP-44 Model Options

View all models

Edit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.

*Highlighted options are not compatible. Please select a different combination.

Output Range

Pressure Range

Pressure Port Size

Pressure Port Type

Maximum Inlet Pressure

Media Type

Input Signal

Connection

Accuracy

Specs

Edit Model Options

Repeatability <0.5% of span.
Electrical Connection 1/2" female NPT.
Weight 6.0 oz (160 g).
Compliance BTL, CE.
Enclosure Rating NEMA 4X (IP66).
Mounting Orientation Flow direction must be parallel to the sensor tip.
Temperature Limits -20 to 140Â°F (-30 to 60Â°C).
Service Oil free, clean dry air filtered to 40 microns.
Power Requirements Loop powered.
Agency Approvals CE, FM.
Air Consumption 0.03 SCFM (0.5 mÂ³/h) typical.
Air Pressure Minimum 3 psig (21 kPa) above maximum output; Maximum 100 psig (700 kPa).
Hysteresis <1% of span.
Input Impedance IP-42 180 ohms; IP-43 and IP-44 220 ohms.
Input Signal 4-20 mA.
Linearity <Â±0.75% of span.
Output Capacity 4.5 SCFM (7.6 mÂ³/h ANR) at 25 psig (175 kPa) supply; 12 SCFM (20 mÂ³/h) at 100 psig (700 kPa) supply.
Pressure Connections 1/4" female NPT.
Relief Capacity 2 SCFM (3.4 mÂ³/h) at 5 psig (35 kPa) above 20 psig (140 kPa) setpoint.
Supply Pressure Sensitivity <Â±0.1% of span per psig (<Â±0.15% of span per 10 kPa).

The Series IP Current to Pressure Transducers converts a current input signal to a linearly proportional pneumatic output pressure. The features include built-in volume booster, low air consumption, field reversible (provides output which is inversely proportional to the input signal) and flexible zero and span adjustments. The rugged NEMA 4X enclosure allows splashdown and outdoor installation. The IP can be used for applications that require operation of valve actuators, pneumatic valve positioners, damper and louver actuators, final control elements, relays, air cylinders, web tensioners, clutches and brakes.

Product Applications

Applications that require the operation of valve actuators, pneumatic valve positioners, damper and louver actuators, final control elements, relays, air cylinders, web tensioners, clutches and brakes

All Models