Call us at 1-888-826-6342
-25°C to +130°C Temperature Dry Block Calibrator
Portable Dry Block Calibrator -25°C (-13°F) to 130°C (266°F)
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Maximum temperature of 130°C/266°F
- Minimum temperature of -25°C/-13°F
- Up to eight setpoints can be stored & recalled
- Insert well & ¼” diameter reference well
DBCL-130 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Process Temperature Unit
Process Temperature Min
Process Temperature Max
Process Temperature Range
Accuracy Value
Stability
Supply Voltage
Style
Communications Protocol
- Maximum Ambient Temperature 40°C (104°F)
- Maximum Temperature Measurement 130°C (266°F)
- Measurement Units °C or °F
- Minimum Ambient Temperature 5°C (9°F)
- Minimum Temperature Measurement Ambient -25°C (-13°F)
- Supply Frequency 100 to 230V, 50/60 Hz, 200W
The DBCL-130 calibrator provides a safe, dry, constant temperature source for checking and calibrating a wide range of temperature sensors, systems, indicators and thermometers. It is fast and economical and can be used either on a bench top or as a portable field unit. The weight of the unit is only 15 pounds/6.8 kilograms. The unit covers the temperature range from -25°C to +130°C in an ambient of 20°C using a machined aluminum block as the heat transfer medium. The temperature control circuit is built into the unit.
Is there a uniformity specification?
Hi Ronboom
Thank you for the inquiry. We do not have a uniformity spec on this product. The sensors should be inserted to the full depth of the well to achieve stated accuracy. All wells meet the stated accuracy spec.
Best regards
OMEGA
Date published: 2021-07-20